TANDBERG CODIAN MSE 8220 Manuel d'utilisateur

TANDBERG Codian IP VCR Tutorial IP VCR 2200 Series MSE 8220 blade Version 4 Revision 4

5 Ensure the Port A checkbox is selected 6 Enter a name for your IP VCR in the H.323 ID to register text box H.323 endpoints that are registered

3 Go to Gatekeeper 4 Select Enabled from the status drop down list The other fields can be left blank as they control gatekeeper neighboring. T

97 For H.323 gatekeeper usage, select Enabled 8 For H.323 gatekeeper address enter the local IP loopback address 127.0.0.1 9 For Gatekeeper r

Creating recordings There are a number of ways to create a recording: f Call out and record: the IP VCR, via its web interface, calls out to a H.323

2 Click Call out and record 3 Type in a name for the recording – for example training recording 2 4 Type in the IP address or hostname of the

Your browser will now show the Recordings list and the new “training recording 2” should be visible and have a status of Recording. Later in the t

12 Click Disconnect selected to disconnect the call and save the recording to the IP VCR Disconnecting the call from the H.323 endpoint will also

The recording console will appear on the endpoint display and you will hear audio instructions about which controls you may use. Recording does not

Recording point-to-point H.323 calls In this section you record a point-to-point call that is routed through the IP VCR. A point-to-point call is one

5 Go to Recordings In the list of recordings you see a recording called Recording_<DATE>_<TIME> where the DATE and TIME are the time th

TANDBERG Philip Pedersens vei 20 1366 Lysaker Norway Telephone: +47 67 125 125 Telefax: +47 67 125 234

If you are not using a gatekeeper with the IP VCR then you can still use this method to record a conference – but you must first set up a gateway on

5 On the IP VCR go to Connections to display the Connections list The connections list will show the active conference with a status of “Recordin

Playing back recordings The Codian IP VCR can stream recordings to a personal computer or play back recordings to H.323 and SIP endpoints. Recordings

By clicking Show advanced streaming options settings modifying the playback video window size and bit rate can be chosen. Viewing in RealPlayer 3

The RealPlayer controls can be used to pause, restart, rewind and fast forward the recording. 6 Practice pausing, restarting, fast forwarding and

Viewing in Windows Media Player 13 If you are not running the latest version of Windows Media Player, upgrade to the latest version at http://www.mi

Playing back to an endpoint 1 Go to Recordings 2 Click on the “training recording 2” made previously 3 Click Call out and play recording

24 4 Type in the IP address of the endpoint that you wish to play the recording on and select whether to connect to it using H.323 or SIP If the

Using the auto attendant By default, when an endpoint connects to the IP VCR, a menu known as the ‘auto attendant’ is displayed. Auto attendants are

6 Go to Connections The active recording will be shown in the connections list. 7 Click on the preview image to update it 8 Click on the

Contents Introduction... 1 Connec

The Status page shows detailed statistics about the connection including the received and transmitted Audio / Video formats for each connection, the

Using Folders Folders can be used both to organize recordings stored on the IP VCR and to restrict access to recordings. 1. To configure folders o

3. Enter a name for the folder e.g. Training and assign 3 unused E.164 numbers to the Recording ID, Recording console ID and Auto attendant ID desc

Recording directly to a folder with the recording console 10. From the endpoint dial the Recording console ID specified above e.g. 312 The recording

Recording computer displays The IP VCR can be used to record and play back an additional video stream known as the content channel. This can be used

Recording the content channel 1 On the MCU set up a conference which includes an endpoint with an H.239 data channel. If necessary refer to the MCU

Using a gateway to call the IP VCR If you are not using a gatekeeper with the IP VCR and MCU units, each unit needs another method to identify how to

Calling out to the MCU 1 Go to Recordings and click Call out and record 2 Type in a name for the recording 3 For Host name or IP address, type

Transferring recordings You can transfer recordings from an IP VCR to a PC. This is often an intermediate step to transferring recordings from one I

4 Click Save 5 Select the folder and file name and then click Save The recording is saved as a file on your PC’s hard disk. Converting a Cod

Introduction This tutorial provides detailed instructions on how to set up and administer the Codian IP Video Conference Recorder (IP VCR). It descri

6 Open an MS-DOS command prompt window and navigate to the directory that you saved the ‘.codian’ recording file in 7 Type the conversion command

Transferring a recording from one IP VCR to another You can transfer a recording directly from IP VCR to another and you will demonstrate this by cop

5 Click Update configuration 6 Return to the Recordings list and click Call out and Record 7 Type in a name for the recording that you wish to

11 Select the check box to the left of the original recording that is now being played back and then click Disconnect selected to stop the recording

Setting up users and editing user privileges Adding a new user 1 Go to Users The list of current users is displayed. By default the IP VCR has an a

42Editing the guest user’s configuration Anyone connecting to the IP VCR has guest privileges. By changing the configuration of the guest user you

Connecting the IP VCR to your network This section gives an overview of the commands needed to set up and log in to the IP VCR. You will make your fi

b. To assign a static IP address, enter the information using the following format and then press Enter: static <IP> <netmask> <def

To configure the unit, you must log in as the admin user. 3 Click Change log in 4 Type in the username admin with no password and press Enter

5

Choosing a gatekeeper A gatekeeper is an H.323 entity on the network that provides services such as address translation and network access control fo