Tandberg Gatekeeper/Border Controller API D14172.01 Manuel d'utilisateur télécharger pdf (Page 52)

TANDBERG Gatekeeper/Border Controller API User Guide

D14172.01 page 52 of 84

RegistrationSerialNumber: <S: 0, 255>

The serial number of the registration to be removed.

SubZoneAdd

Adds and configures a new subzone.

SubZoneName(r): <S: 1, 50>

Assigns a name to this subzone.

Address1: <S: 0, 39>

Specifies an IP Address used (in conjunction with the IP Prefix Length) to identify a

subnet to be assigned to this subzone.

PrefixLength1: <0..128>

Specifies the number of bits of the Subnet IP Address which must match for an IP

Address to belong in this subzone.

Address2: <S: 0, 39>

Specifies an IP Address used (in conjunction with the IP Prefix Length) to identify a

subnet to be assigned to this subzone.

PrefixLength2: <0..128>

Specifies the number of bits of the Subnet IP Address which must match for an IP

Address to belong in this subzone.

Address3: <S: 0, 39>

Specifies an IP Address used (in conjunction with the IP Prefix Length) to identify a

subnet to be assigned to this subzone.

PrefixLength3: <0..128>

Specifies the number of bits of the Subnet IP Address which must match for an IP

Address to belong in this subzone.

Address4: <S: 0, 39>

Specifies an IP Address used (in conjunction with the IP Prefix Length) to identify a

subnet to be assigned to this subzone.

PrefixLength4: <0..128>

Specifies the number of bits of the Subnet IP Address which must match for an IP

Address to belong in this subzone.

Address5: <S: 0, 39>

Specifies an IP Address used (in conjunction with the IP Prefix Length) to identify a

subnet to be assigned to this subzone.

PrefixLength5: <0..128>

Specifies the number of bits of the Subnet IP Address which must match for an IP

Address to belong in this subzone.

TotalMode: <None/Limited/Unlimited>

Determines whether this subzone has a limit on the total bandwidth of calls being used

by its endpoints at any one time.

Total: <1..100000000>

Sets the total bandwidth limit (in kbps) of this subzone (applies only if Mode is set to

Limited).

PerCallInterMode: <None/Limited/Unlimited>

Determines whether there is a limit on the bandwidth for any one call to or from an

endpoint in this subzone.

PerCallInter: <1..100000000>

Specifies the bandwidth limit (in kbps) on any one call to or from an endpoint in this

subzone (applies only if Mode is set to Limited).

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 83 84

Commentaires sur ces manuels

Pas de commentaire